BOGEN PUMPS
Bogen Pumps Industry Co., Ltd
Add to Cart
Low Noise Air Operated Diaphragm Pump For Alkali And Various Organic Solvents
Air Operated Diaphragm (AOD) Pumps were designed to resolve numerous problems that pumpers’ face on a job site. Whether you have limited space, are moving fluids with mixed solids or compositions, or require a safe priming pump system for your job, our AOD pumps provide a portable solution to get the job done.
Operating through a dual-diaphragm fluid chamber, positive displacement creates an air vacuum, initiating quick priming with minimal effort. Once primed, air operated diaphragm pumps are capable of passing up to 1-¼ inch solids (up to 90% solid composition) and highly viscous fluids with ratings exceeding 25,000 cPs. AOD Pumps’ fluid handling, portability and durability make them a versatile pump for any job application.
Air Operated Diaphragm Pump Advantage
1. No irrigation water, suction up to 5 meters, head up to 70 meters, the outlet pressure > 7bar
2. Wide flow and good performance, which allows the maximum particle diameter of 10 mm. Pumping mud, impurities, minimal wear and tear on the pump
3. Head, flow through the valve open to realize the stepless adjustment (pressure regulator between 1-7bar)
4. The pump has no moving parts, no seals, diaphragms exhausted medium and pump running parts, working medium is completely separated from the transmission medium does not leak out. So pumping toxic, volatile or corrosive media, will not cause environmental pollution and danger to personal safety.
5. Do not have electricity, flammable and explosive places safe and reliable.
6. Can be immersed in the medium.
7. Easy to use, reliable, open stop simply open and close the gas valve, even for long periods because of accident or sudden stop running without media will not result in damage to the pump, once the overload, the pump will automatically shut down, with self-protection performance, when the load is back to normal, and can automatically start running.
| Item | Description | Unit | Reference Figure |
| 1 | Maximum air inlet pressure | Mpa | 0.83 |
| 2 | Maximum flow rate | L/Min | 192 |
| 3 | Maximum lift | M | 70 |
| 4 | Maximum outlet pressure | Mpa | 0.83 |
| 5 | Maximum particle size | mm | 3 |
| 6 | Weight | kg | 12.3 |
| 7 | Noise level | db | ＜70 |
A 2 5 X X - X X X - X (model selection)
Form of pipe mouth:A-BSP B-NPT(F) C-Flange
Diaphragm material:9 – Santoprene H – Hytrel T - PTFE/Santoprene
Ball material:9 -Santoprene H – Hytre T – PTFE A - Acetal
Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless Steel
Pump material: SS –Stainless Steel AL –Aluminum Alloy CI- Carbon Steel P/K –Polypropylene/Kynoar
Maximum Applied Temperature Limits (diaphragm / ball / seal material)
Acetal ···············································40°- 150°F (4.4- 65.5°C)
Santoprene························································································-40°- 225°F (-40°- 107.2°C) ··································································································40°- 220°F (4.4°- 104°C) Nitrile···································································································10°- 180°F (-12°- 82°C) Viton································································································-40°- 350°F (-40°-176.6°C) Hytrel···································································································-20°-150°F (-12°- 93°C) Kynar································································································10°-200°F (-28.9°- 65.5°C) Polypropylene····························································································32°- 175°F (0-79.4°C)